Mono Butyl tin Oxide(MBTO) is a neutral catalyst used to boost up reaction rate & increase the yield of the products, improves colour, better control of reaction in Esterifications, Trans-Esterification, Polycondensations reactions for Unsaturated Polyesters, Fatty Acid Esters, Phthalate / Adipate Esters, Treamellitates.
Approximately 0.1 % of total reaction mass.PACKING: 20 Kgs. HDPE Open Mouth Drum with Liner.
APPLICATIONS: Butyltin tris(2-Ethylhexoate) is an effective Liquid Organo Tin Compound for Esterifications & Trans-Esterifications. It is used in preparation of Plasicizers, Saturated & Unsaturated Polyesters & Polyester Resins. Being neutral Catalyst neutralization and washing can be eliminated, easily used in Stainless Steel Reactors & side reactions are minimized. In the preparation of Phthalate Plasticizers a Catalyst level of 0.03 % by weight of Phthalic Anhydride is recommended and Acid Value upto 0.1 may be reach within four hours.PACKING: 35 Kgs / 55 Kgs / 220 Kgs HDPE Drum.
Stannous Oxalate is a neutral catalyst used to boost up reaction rate & increase the yield of the products mainly used in Esterifications reaction. It is also used in Dyeing & Printing Textiles.
25 Kgs. / 50 kgs HDPE Open Mouth Drum with Liner.
|Appearance||Pale Yellow Liquid.|
|Density (gm/cc at 20º C)||1.31|
|Freezing Point||5 - 10º C|
|Boiling Point||139º C|
|Solubility||Insoluble in water & most of organic Solvents|
DiButylTinDiacetate (DBTA) is used as moderate to rapid cure catalyst for Silicones, Silanes & Siloxanes. Being a neutral catalyst can be used in Esterifications, Trans-Esterifications in Polyurathane reactions.
Approximately 0.01 - 1 % of total reaction mass.
|Appearance||Milky White Amorphous Powder.|
|Tin Content||47 % (± 0.5 %)|
|Degradation||Above 340º C|
|Volatility||1 – 1.5 %|
|Density (gm/cc at 20º C)||1.30 – 1.40|
|Solubility||Insoluble in water & most of organic solvents.|
Dibutyltin Oxide(DBTO) is a neutral catalyst mostly applied for faster rate of reaction, improves colour, better control of reaction in Esterifications,Trans-Esterifications, & polycondensations processes. It is an efficient catalyst to minimize impurities, improves product quality, yield, leads to bring down reaction time, power consumption & hence cost of the production. Mainly used in preparation of Esters, Polyesters, Alkyd Resins and Esters of Methacrylates etc.
Approximately 0.1 % of total reaction mass.PACKING: 20 Kgs / 50 Kgs PE Open Mouth Drum.
|Appearance||Light Yellow Liquid.|
|Tin Content||19 %|
|Density (gm/cc at 20º C)||1.03 – 1.47|
|Refractive Index||1.46 – 1.47|
|Viscosity||Upto 50 cps at 30º C.|
|Solubilty||Soluble in most of organic solvents.|
DiButylTinDilaurate (DBTL) used as a catalyst for Polyurethanes, Polyols & Silicones.
Approximately 0.1 % of total reaction mass.PACKING:
35 Kgs / 55 Kgs / 220 Kgs HDPE Drum.